58 inch 2 Piece Peradon Joe Davis cue

This full size, 58 inch, two piece cue is crafted by Peradon in England from kiln dried, North American Ash and exotic Ebony.

The Ash is carefully selected for strength and straightness before being turned and machine spliced to the finest Ebony butt timber. An Ebony front splice and Sycamore veneer is then spliced to the butt section to further enhance the appearance. The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and fitted to ensure precise alignment of the Ash grain either side of the brass collar. A 'quick action' butt end joint is fitted to accept the optional extensions below. 

The butt is finished with a name plate bearing the signature of the legendary Joe Davis, who praised the craftsmanship of Peradon and gave the company the sole rights to use his name indefinitely.

This cue features a solid brass ferrule and 9.5 to 10mm Elkmaster tip..

Cue Length	58" (147.5cm)
Shaft Length	28.5 (72.5cm) - plus 1" (2.5cm) for the protruding male joint
Butt Length	29" (74cm)
Tip	9.5mm to 10mm  Elkmaster
Ferrule	Brass
Shaft	Selected kiln dried North American Ash
Butt	Machine spliced genuine Ebony
Butt Decoration	Large Ebony front splice with sycamore veneer
Joints	Solid brass 'Quick Action@ in the center of the cue
Butt End Joint	Yes, Quick Action
Approximate Weight	Medium 16 1/2oz up to 17 1/2oz or Heavy 17 1/2oz  up to 19oz

 

 

 

 Extensions: The cue has a female butt end joint to accept the following extensions:

• (1640) 6" mini butt
• (1641)12" telescopic mini butt
• (1643) 23" telescopic butt extension
• (1642) 20" midi butt extension
• (1646) 30" Ebonised Extension